ST51 Greenhouse Gas (GHG) Flow Meter For Process & Plant Flue Gas Applications

The ST51 Flow Meter manufactured by Fluid Component International measures and monitors industrial plant greenhouse gases.  The ST51 features a no-moving parts design that’s non-clogging and operates over a wide flow range with low-flow sensitivity.  It’s packaged in an explosion-proof transmitter, and the calibration is matched to the user’s actual gas composition and installation conditions.        

The FCI ST51 Flow Meter features a thermal mass, insertion-style flow element with flow accuracy to ±1% of reading over a broad flow range from 0.3 to 400 SFPS  (0.08 to 122 MPS), and repeatability of ±0.5 percent of reading.  The flow element is available for use in line sizes from 2 to 24 inches (51 to 610 mm).  It operates over a wide turndown range of 100:1 and at temperatures from 0 to 250°F (-18 to 121°C). It withstands pressures up to 500 psig [34 bar (g)].

The ST51 Flow Meter’s flow sensing element has no moving parts and no orifices to clog or foul to attain virtually maintenance-free service in wet, dirty biogas applications. The flow element is constructed with a 316L stainless steel body and Hastelloy C-22 thermowell sensors to resist corrosion. It includes built-in temperature compensation circuitry for accurate, repeatable measurement year-round as temperatures rise and fall seasonally. 

Dual 4-20mA analog outputs are user assignable to flow rate and/or temperature, and there is a 0-1kHz pulse output for totalized flow. The transmitter’s digital communications include an RS-232C port, and with units that have the digital display option there is a wireless IR link for PDA use.

For applications with difficult access or display readability, the ST51’s flow transmitter is also available in a remote mount configuration that can be mounted up to 50 feet (15m) away from the flow element inserted the pipe.  Both the remote mount and integral transmitters are housed in an aluminum enclosure that is NEMA 4X approved and meets IP67 requirements for water and dust ingress protection.  Input power for the ST51 can be selected as either 18 to 36 Vdc or 85 to 265 Vac.  

- FCI

want to know more?

Back